Pile Cage Foot

The Pile Cage Foot is a two piece product, once assembled, it is used to ensure concrete cover at the bottom of the Reinforcing Pile Cage.

The Cage Foot Extention has been designed to extend the cover of 85mm Cage Foot whilst maintaining it's impressive load carrying ability.

Manufactured under AS/NZS ISO 9001:2015 guidelines the Pile cage Foot is designed to withstand up to a 500 kilogram dead weight (85mm Cage Foot).

Features of the Pile Cage Foot:
- Provides Concrete Cover of 85, 100 or 150mm.
- Manufactured from recycled materials.
- Simple assembly and push-fit installation.
- Suites bar sizes from 20mm to 40mm.
- Exceeds AS/NZS 2425:2015 200 kilogram load requirements.

Suggested Usage:
*** Total cage weight must not exceed "Number of feet per        cage x Load limit", for example 1000 kg cage requires        at least 5 x 100mm Cage Feet.
***  Higher loads can be achieved by using a 85mm Cage Foot        PLUS a 100mm Cage Foot Extension.
*** Consideration needs to be given to the possibilty of        UNEVEN ground where some Cage Feet may be over        loaded.

*** Pile Cage Feet and Extensions are injection moulded using Black 100% Recycled Polypropylene. Our contribution to rid the World from plastic waste.

Pile Cage Wheel /Centraliser Product Description and Use:

The extra wide outer edge, of the Pile Cage Wheel, gives a firm footprint in soft soils. Sturdy wall sections ensure the Wheel provides the correct cover under heavy loads.

The Push-Fit mechanism provides quick installation and requires no tools to install the wheel. The cage wheel has a security clip lock, to ensure the wheel stays where you put it.

Features of the Pile Cage Wheel:
- Provides Concrete Cover of 50mm or 75mm.
- Manufactured from recycled materials.
- Simple push-fit installation.
- Available to comply with AS/NZS 2425:2015 standards.
- Suites bar sizes from 10mm to 20mm.

*** We stock these sizes, but other sizes may be imported if and when required.

*** Pile Cage Wheels are injection moulded using Black 100% Recycled Polypropylene. Our contribution to rid the World from plastic waste.

Pile Cage Wheel Push-Fit Mechanism:

The Push-Fit Mechanism allows the Pile Cage Wheel Spacers to be installed without the need for any tools. This mechanish is the first step in ensuring that the Pile Cage Wheel Spacer remain in place when the Pile Cage is lowered into position.

Formwork and Scaffolding Accessories
We supply formwork and scaffolding accessories, to the Formwork and scaffolding industries, such as:
1.   Base Jack Nuts for Scaffolding
2.   Base Jacks for Scaffolding
3.   Ferrule dollies for light Formwork
4.   Ferrule Jacks for Light Formwork
5.   Swivel Couplers for Scaffolding
6.   Fixed Couplers for Scaffolding
7.   T Bolts for Scaffolding Couplers
8.   Tie Rods for Formwork
9.   Corner Fillets with lip for Formwork economy panels
10. Chamfer with lip for Formwork economy panels
11. Plain Chamfer for Formwork economy panels
12. Water Stoppers for Formwork

Rebar Processing Equipment and Rebar Accessories
We also supply a wide range of rebar processing equipment and accessories, to the rebar processing and rebar placement industries, such as these Rebar Cutters:
1.   DC-16LZ Rebar Cutter - 220V
2.   DC-16W Rebar Cutter - 220V
3.   DC-20HL Rebar Cutter - 220V
4.   DC-20W Rebar Cutter - 220V
5.   DC-20WH Rebar Cutter - 220V
6.   DC-25X Rebar Cutter - 220V
7.   DC-25W Rebar Cutter - 220V
8.   DC-32WH Rebar Cutter - 220V
9.   M26 Rebar Cutter - 380V
10. M36 Rebar Cutter - 380V
11. M45 Rebar Cutter - 380V
12. MG20H Rebar Cutter - 220V

and these Rebar Benders:
1.   DBD-16L Rebar Bender - 220V
2.   DBD-25H Rebar Bender - 220V
3.   DBD-32X Rebar Bender - 220V
4.   B26 Rebar Bender - 380V
5.   B36 Rebar Bender - 380V
6.   B45 Rebar Bender - 380V
7.   MG20B Rebar Bender - 220V

and Combination Rebar Cutters and Benders:
1.   Manual Rebar Cutter Bender
2.   Mobile Rebar Cutter Bender - Powered by own generator.
3.   DBC-16H Rebar Cutter Bender - 220V
4.   DBC-25X Rebar Cutter Bender - 220V
5.   MG20HB Rebar Cutter Bender - 220V

Top Brand Wire Grips or Wire Pullers
RMCS supplies the Top Brand Nagaki Wire Grips, also known as NGK Wire Grips:
1.   Top Brand Wire Grips